VIDEOTEK DL-810 Legalizer

244

Gebraucht

Serial Digital Legalizer

Mehr Infos

Lieferzeit:

129,00 € zzgl. MwSt. zzgl. MwSt. zzgl. Versandkosten

Gewicht: 1.5 kg

Auf meine Wunschliste

Mehr Infos

VIDEOTEK DL-810

Serial Digital Legalizer

Diverse Stückzahlen an Lager

The DL-810 Serial Digital Legalizer offers the ultimate solution to the complex world of 601 video legalizing. Harris Videotek® is the world leader in serial digital video gamut correction. In Auto-Legal mode, the DL-810 evaluates the video signal in real time, on a pixel-by-pixel basis and provides an output which is guaranteed to be within NTSC or PAL encoded legal limits. The unit also provides adjustments for setting the traditional RGB limits of 0 mV and +700 mV. All limit points are variable which allows for many custom configurations.



Other unique features include the ability to set a chroma amplitude limit and an encoded vector circle limit. The DL-810 is CCS compliant for use with Co-Pilot/Pilot/Navigator Software and the NUCLEUS user customizable control panel. Options include a software keyable proc amp and gamut monitoring output.

Backed by over a quarter century of video engineering excellence and years of extensive research into the complexity of video legalization, Videotek proudly offers the DL-810 as a total solution to all present and future 601 gamut concerns.

Features

  • Instantaneous evaluation and correction - pixel-by-pixel
  • Full EDH support
  • RS-232/422 and GPI control
  • Standard front-panel EQ notification
  • 16-bit, 4:4:4 internal processing
  • Adjustable clip softness
  • Fully adjustable RGB and Encoded limits, plus defaults
  • Separate settings for NTSC and PAL limits
  • Vector and total video limits
  • Completely self-contained
  • NTSC 7.5 or 0 menu select
  • Standards available: 525 and 625

    SPECIFICATIONS Specifications and designs are subject to change without notice

    Video 
    InputOne serial digital, per SMPTE 259M-C
    Input ConnectorBNC female, terminating
    Input Impedance75 ohms
    Input Return Loss<-18 dB, 5 MHz - 270 MHz
    Data Format10-bit 270 Mb/s
    4:2:2 component, 525/60 or 625/50
    4:3 aspect ratio, at 13.5 MHz luminance sampling rate
    Internal Processing16-bit, 4:4:4 component processing
    Input Level800 mV p-p nominal, w/equalization for up to 250 m of 8281
    OutputsFour serial digital per SMPTE 259M-C
    Output ConnectorsBNC female
    Output Impedance75 ohms
    Output Return Loss<-18 dB, 5 MHz to 270 MHz, processing
    Output Level800 mV p-p ±10% into 75 ohms
    Passive BypassThe primary output is passively connected to input with power loss
    EDHFully supported, per SMPTE RP-165
    Ancillary DataAll non-EDH ancillary data in vertical and horizontal blanking intervals is passed without modification
    Throughput Delay~12 µs
     
    Control 
    RemoteRJ-45 female, Ethernet port 10/100
    Base-T
    Web browser interface
    GPI15-pin High Density D-sub, Selection for HD, SD, RGB and Encoded Legalization enable or disable
    Bypass on or off
    Selectable status indication of Input Data Range Error, By-pass Status, HD Gamut Alarm, RGB Gamut Alarm, Encoded Gamut Alarm, and SD Gamut Alarm
     
    Adjustments 
    Luma Black Clip 
    Luma White Clip 
    Composite Upper Limit 
    Composite Lower Limit 
    Chroma Amplitude limit 
    R, G, B Maximum level 
    R, G, B Minimum level 
    Clip Softness 
     
    Mechanical 
    DimensionsHeight: 1.6” (4.1 cm)
    Width: 8.3” (21.1 cm)
    Depth: 17” (43.2 cm)
    Weight9 lb. (4.1 kg)
     
    Power 
    Power Source115-230 VAC 50/60 Hz nominal
    Power Consumption35 VA
     
    Environmental 
    Operating Temperature0° C to 40° C
    Storage Temperature-20° C to 70°C
    Humidity0 to 90%, non-condensing